NlightN Flat Panel Speakers produce sound in a totally different way from conventional speakers. The panel’s wider dispersion pattern fills the listening area with an expansive “sound field,” eliminating the “beaming” of conventional speakers and immersing the listener in a wider audio “sweet spot.” There is less volume drop off over distance than with standard speakers. The NlightN speaker panel has twice the bandwidth of a traditional speaker unit. One panel will replace both the midrange unit and the tweeter in a conventional system. NlightN speakers deliver extremely high vocal intelligibility, essential for good quality PA. A conventional bass speaker or subwoofer such as the Slammer handles the very low frequencies.
Frequency Response : 100Hz > 18Khz
SPL (1w -1m) : 93/114dB
Power Handling ~ Continuous : 100W
Impedance (nominal) : 8Ohm
Crossover Frequency : 150Hz
Driver Type : 6 x 25mm Exciters
Jack & Speakon Connections
Grilles and gig bags are NOT included in this package
Speaker stands are included
Dimensions (HxWxD)mm : 750 x 550 x 86
Weight : 8kg
Model no: SS4170
Carlsbro Megamix 8 DSP
4 Mono 2 Stereo Channel Unpowered Mixer with DSP + ABS Carry Case
4 Mono Channels, 2 Stereo Channels
100Hz Low Cut Filter (Mono ch only), Hi Z Line Input, Lo Z XLR Mic Input
L & R Insert, L & R H/P Booth, H/P Booth Level
Peak LED
Channel Gain Control, 3 Band Channel EQ Control, Rotary Channel Volume, Channel Monitor Control, Channel FX Control, Channel Pan
Tape/CD input/output, Tape/CD Level
FX Send, FX Return (L & R)
Monitor Output & Control
Main Output - L & R (Unbalanced)
16 FX DSP
Dimensions (HxWxD)mm : 45 x 270 x 345
Weight : 4.5kg
Model no: MA3440
Carlsbro Slammer II Powered 1 x 15" Cabinet with 2 x 150W Satellite Outputs and 1 x 300W Internal Bass Amplifier
The Slammer has been designed with a small footprint, and is capable of being used in vertical or horizontal orientation to fit in with installations if required. The cabinet is robustly constructed from 18mm plywood with asymmetric internal bracing to reduce cabinet modes and standing waves. A tough steel grille protects the speakers. It has jack, XLR and phono inputs, plus XLR link outputs to allow connection to, and integration with virtually any system or install. The internal amplifiers provide 300W to the subwoofer section (which uses dual custom desingned long throw 10” woofers, with Kevlar loaded cones), and 2 x 150w (into 4 ohm) to the satellite outouts. Controls are provided for left and right satellite volume, subwoofer volume and crossover point (all with built in limiters to prevent damage and distorsion), plus phase reversal switch (between sub and sats), and a 120Hz switchable high pass filter on the satellite outputs. All the inputs and controls can be covered with the included tamper proof panel to prevent unwanted alterations after set up.
[ekm]368x300[ekm].jpg)
